IHT-D
Specification Sheet
Watch Installation Video Specifications
- Solid 316L Machined Stainless Steel Construction
- Forward rotating COMFORTFEEL™ lever handles
- Hot side lever is spring loaded for automatic shutoff 1/4 turn
- Ceramic disk cartridges
- Spout rotates 360°
- Laminar Ideal Flow®
- Thermally insulated spout
- Provides filtered (not included), hot water, 208°F max temperature
- Provides filtered (not included), cold water (not chilled)
- Optional base ring included
- 8 7/8” fill height from deck to spout outlet
- Total height 13 1/4”
- .50 GPM maximum flow rate for hot water
- 1.30 GPM* maximum flow rate for cold (not chilled) water
- Maximum counter thickness 2 1/4”
- Minimum install hole diameter 1 3/8”
- Compatible with reverse osmosis filtration systems
- Limited Lifetime Mechanical and Finish Warranty
- For use with full flow filtration unit (not included)
- For use with Ideal Hot Water Tank™ (included)
*Note: May reduce water flow
**Available with or without Filtration System
Construction
- Solid 316L machined stainless steel construction
- Available in Polished, Matte, PVD Gun Metal Gray™ PVD Satin Black, PVD Brushed Gold, PVD Polished Rose Gold
- Indoor & outdoor
- Limited Lifetime Warranty
- Made in Italy
Materials & Finishes
Polished Stainless Steel
Matte Stainless Steel
PVD Gun Metal Gray™ Stainless Steel
PVD Satin Black Stainless Steel
PVD Brushed Gold Stainless Steel
PVD Polished Rose Gold Stainless Steel
Codes/Standards
Codes/ Standards
- ASME 112.18.1
- CSA B125.1
- NSF 61, 372
- CAL Green
- cUPC
- ADA
Ideal Hot Water Tank™ Included
Learn More
- Digital control touch panel
- Adjustable temperature settings = 3° increments
- Seven preset temperatures = 167°-208°F
- Digital temperature control within 1-2°
- On/off button with vacation mode feature
- 1500 watt/120-volt ceramic encased rapid-recovery element
- 60 cups per hour capacity
- Standby reheat feature with low energy consumption 1 W
- Standby reheat at 6° temperature-drop
- Built-in dry Burn and overheat sensors
- Built-in 60 psi RV with patented Baffle Fill System
- Encased element prevents limescale build-up
- Double venturi reduces faucet “dripping/spitting”
- Compatible with reverse osmosis filtration systems
- Space-saving 7 1/2” W x 7 1/2” D × 10 3/4” H
- Cabinet-side or floor-mount install options
- Parts Included: Silicone Washers, Adapters
Water Filtration System Included
(Hot & Cold Taps are also available without Filtration)
Learn More
- Service flow rate 2.0 gpm
- Rated capacity 7,900 gallons
- Operating pressure 10 – 125 psi
- Operating temperature 35 – 100°F
- Overall dimensions 16 7/8” L x 4 1/8” D
- Quick twist-lock cartridge replacement
- Internal parts never exposed to human handling
- Filtration protects capital equipment from early breakdown
- Installs vertically (allow 2 1/2” clearance)
- Install in cold water supply only
- Use with Ideal Tap, BarTap®, Hot & Cold Tap and Pot Filler Tap
